Home/Services/Tile & grout cleaning

Tile & grout cleaning in Hayward, Castro Valley & the East Bay

Mopping pushes dirty water into the grout lines, and over the years they darken no matter how often you clean. Our three-step process lifts that buildup out and brings the grout back to the color it was installed in.

★★★★★ 4.9 rating · 80+ reviews IICRC-certified 100% satisfaction guarantee
Steam cleaner being used on a tiled bathroom wall

Bring your grout back to its original color

We apply a cleaning solution to loosen the buildup, scrub the tile and grout lines, then rinse with high-pressure hot water and extract the dirty water with dedicated tools connected to the truck-mounted system. No puddles, no spraying the walls, no residue.

Once the grout is clean and dry, a sealer is the best money you'll spend: it keeps spills on the surface so routine mopping actually works. We recommend it and can apply it the same day.

What we clean

  • Kitchen, bathroom, entry and laundry floors
  • Showers, tub surrounds and backsplashes
  • Ceramic, porcelain and natural stone tile
  • Grout sealing after cleaning (recommended)
  • Commercial restrooms, lobbies and break rooms

Cleaning restores the grout's original color; it doesn't change it. If you'd like a new color, ask about grout color-sealing.


Our three-step process

Most tile floors are done in a couple of hours and can be walked on right away. Sealer needs a little longer to cure.

Pre-condition

An alkaline cleaner matched to the tile sits on the floor and softens years of grease, soap scum and tracked-in soil.

Scrub

Grout lines and tile faces are agitated with brushes and a floor machine so the loosened buildup is free to move.

Pressure rinse & extract

Hot water at controlled pressure rinses everything out of the grout while the vacuum captures it — then we seal if you've chosen to.


Stone, sealing and hard floors

Natural stone floor in a home

Stone cleaning & sealing

Travertine, slate, limestone and other natural stone need pH-appropriate cleaners and a penetrating sealer, not the acid-based products that etch them. We clean, rinse and seal so spills wipe up instead of soaking in.

Freshly stripped and waxed VCT floor with a high-gloss finish in an office

VCT stripping & waxing

We strip away old wax and built-up dirt, clean the floor thoroughly and apply a high-grade, high-gloss finish. A great way to refresh dingy VCT in kitchens, break rooms, classrooms and gyms. Commercial


Good to know before you book

Will my grout be white again?
It will return to its original color — which is often lighter than you remember. Grout that was stained by dyes or has been damaged may not fully recover, and we'll show you what to expect during the walk-through.
How long before I can walk on it?
Immediately after cleaning. If we seal the grout, keep foot traffic light and avoid water for 24 hours while it cures.
Do you clean showers?
Yes — tile showers, tub surrounds and backsplashes. Mineral deposits and soap scum need a different approach than floors, so mention it when you book.
Is sealing really necessary?
It's optional, but it's the difference between grout that stays clean and grout that darkens again in a year. We recommend it for kitchens, entries and bathrooms.

From our customers

★★★★★
Prompt, communicative, reliable, and on budget.
Mike L.Google review
★★★★★
Showed up on time and very friendly! Went above and beyond.
Melissa S.Yelp review

Often booked together

Combine services in one visit and we'll plan the order and drying around your household.

Get a tile & grout cleaning quote

Send a photo of the floor and rough square footage and we'll quote it — sealing included if you want it.

Request a free quote (510) 481-7607 Text photos to (510) 333-9710 for a faster quote